Rolling Ingot Specifications

Posted: 05/12/2014


Table of Contents

1.0 Purpose of Rolling Ingot Specificaton
2.0 Material Safety Data Sheets
3.0 TBD
4.0 General Specification
5.0 TBD
6.0 TBD
6.1 Foreign Materials, Contamination
6.2 TBD
6.3 TBD
6.4 TBD
6.5 TBD
6.6 TBD
7.0 TBD
8.0 TBD
9.0 TBD
10.0 TBD
11.0 TBD
12.0 TBD
13.0 TBD
14.0 TBD
15.0 TBD
16.0 Radioactive Contamination

 

1.0 Purpose of Rolling Ingot Specification

This document is intended to serve as a guideline for purchasers, suppliers and receivers of rolling ingot for Logan. It will cover specifications, documentation, qualification, delivery and rejection of incoming ingot. Not all aspects of rolling ingot receiving and requirements may be covered in this document. If there are any questions please contact Logan.
 

TOP

 

2.0 Material Safety Data Sheets (MSDS)

Per the requirements of 29 CFR 1910.1200, the supplier, vendor, or importer must provide a Material Safety Data Sheet (MSDS) for the rolling ingot sold to TAA or Novelis, or must verify that the material meets the posted MSDS on this site.
 

TOP

 

3.0 TBD

 

TOP

 

4.0 General Rolling Ingot Specification

(For more details see the sections that follow)

  • Safety will not be compromised for any reason. Personal injury, environmental destruction and equipment damage will not be tolerated.
  • Each load will be inspected upon delivery.
  • Physically unloading an ingot and releasing the delivering carrier does not imply acceptance of the load or the shipped weights. Logan has the right to reject all or part of a load if the specifications described in this manual are not met.
  • Each rolling ingot must be marked legibly and permanently with manufacturers heat number and the 4 digit AA alloy code.
  • Any banding used to hold pieces/ingots together must be steel.
   

 

   
TOP

 

5.0 TBD

 

TOP


 

6.0 TBD

 

TOP

 

6.1 Foreign Materials, Contamination

Safety is Logan’s core value. There is zero tolerance for foreign materials and contaminants.

Foreign materials are defined as dross, pot room bath, salts, corrosion, dirt, gravel, aluminum "fines", un-melted scrap, nitrates, sulfates, oxidizers, fertilizers, unknown powders or residues, asbestos, volatile substances, non-aluminum contaminants, ammunition, closed containers, crimped tubing, PCB's, radioactive materials (2 times Background radiation), aluminum-lithium alloys, any non-aluminum materials contained inside, on the surface of or protruding from the ingot. Foreign materials are not permitted. Affected inputs may be rejected.  Rejected ingots will adversely affect your performance rating.

Suppliers agree to indemnify and hold Logan Aluminum, its Associates (TAA and Novelis), and its tollers harmless from any claims, demands, cost and expenses (including reasonable attorney's fees), resulting from or arising under, in whole or in part, a breach of the foregoing warranty that their product is not contaminated with foreign materials whether caused or contributed to in whole or in part by the negligence of Logan Aluminum, its Associates (TAA and Novelis), or its tollers.

 

TOP

 

6.2 TBD
 

TOP

 

6.3 TBD

 

TOP

 

6.4 TBD

TOP

 

6.5 TBD

 

TOP

 

6.6 TBD

 

TOP

 

7.0 TBD

 

TOP

 

8.0 TBD

TOP

 

9.0 TBD

 

TOP

 

10.0 TBD

TOP

 

11.0 TBD

TOP

 

12.0 TBD

TOP


 

13.0 TBD

 

TOP

 

14.0 TBD

TOP

 

15.0 TBD

 

TOP
 
 

16.0 Radioactive Contamination

Material delivered to Logan Aluminum and found to be contaminated by radiation will be handled according to Logan policy. Any material triggering a Logan radiation detector will be rejected. TAA/Logan will have the right to revoke the acceptance of the material at any time. All costs and liability associated with radioactive material will be the responsibility of the supplier.